SWLing Post reader, Claudiu, writes:

I have a question regarding the ETM (Easy Tuning Mode) function on the Tecsun PL-880 model. Its indicator is visible on the LCD screen [see above], but I couldn’t find any mention of this function for this model. What should one do to enable that indicator and use the function? I’ve seen mention of this for earlier models (PL-380/PL-390), but not for PL-880, even after looking over the hidden features. Do you, or your followers, have any idea on this?

Very good question–it would be nice if the PL-880 had a hidden ETM function, but I suspect the PL-880 may simply use a stock Tecsun display; “ETM” may be standard print.

By chance, has anyone discovered a hidden ETM function on the Tecsun PL-880? If so, please comment.

[19 January 2016: Please read this updated post.]

Many thanks to SWLing Post reader, Pawel (SQ9ZAV), who writes from Poland:

Hello Thomas,

On November 4, 2015, I bought a Tecsun PL-880 from ErcomeR company.

I found an error: the last two digits of hundreds and tens Hz in SSB mode correctly change the direction of rotation of the knob fine tuning, however, the actual frequency varies in the opposite direction.

I reported a bug in the company ErcomeR, and they sent an e-mail to the Tecsun company.

ErcomeR received information from Tecsun that one of the PL-880 integrated circuits had been changed to the one used in Tecsun PL-365; no one checked whether the program was working properly.

The previous version of the radio made in May 2015 does not have this error.

Best regards – Pawel Kita, SQ9ZAV

Pawel also noted that communicating with Tecsun’s Engineering/R&D department is quite difficult since all communications are first passed through the Tecsun Sales department.

I hope that Pawel can keep us apprised of the situation. My Tecsun PL-880 is one of the earliest production runs, so doesn’t have the PL-365 IC Pawel describes.

If you purchased a Tecsun PL-880 recently, you might verify this as well–please comment.

[19 January 2016: Please read this updated post.]

In response to Pawel’s post about a tuning bug affecting a recent batch of Tecsun PL-880s, SWLing Post contributor Georges (F6DFZ) comments:

I have posted a new video about this important bug of the PL-880.

I did so because it seems some people don’t understand this very important issue.

This video shows the Tecsun PL-880 tuning bug which is present on SSB when using the Fine Tuning knob.

The PL-880 is tuned to the Shannon Volmet on 5,505 MHz USB.

At the beginning, I use the coarse Tuning knob to shows the effect of tuning 1 kHz down ; the pitch of the voice increases as we are on USB.

Then, I tune down 1 kHz using the Fine Tuning knob, and now the pitch of the voice decreases, indicating the bug with the reverse tuning using the Fine Tuning knob on SSB.
At the end, I use the coarse Tuning knob to hear the voice with a normal pitch, and you can see that the displayed frequency is 5,503.01 MHz, a difference of nearly 2 kHz versus the true frequency.

Best regards, and a Happy New Year

Georges F6DFZ

Thank you, Georges. Since I have an early PL-880 model that doesn’t have this bug, your video and explanation does clarify the situation.

That is frustrating. Until this bug is fixed, I couldn’t recommend purchasing a new Tecsun PL-880. I hope someone can confirm when the bug is fixed and the production run is once again free of this tuning issue.

Many thanks to Pawel and Georges for bringing this to our attention.

Many thanks to SWLing Post contributor, Georges (F6DFZ), who writes:

As you may know, a few [of us PL-880 owners] have documented the extremely annoying bug that affect the Tecsun PL-880 during Fine Tuning of SSB signals.

To sum it up, recently manufactured Tecsun PL-880 tune backward when using the Fine Tuning knob in SSB mode. This result in a very bad tuning feeling, especially for SWL and Ham radio operators, 1 kHz frequency jumps each kHz and a displayed frequency that can be off as much as 2 kHz.

Anna from Anon-Co has been very cooperative, serious, kind, in short: an outstanding person. She never denied the problem, and found a solution to correct it by loading a 8820 firmware just anterior to the buggy one.

Now, all PL-880 sold by Anon-Co have the corrected firmware.

I am extremely pleased with my PL-880 and I need to add that the tuning experience with the corrected firmware is night and day. Now, you can tune continuously using the Fine Tuning knob, without hitch and very smoothly ; the lack of shuffling is also very welcome, as is the Variable Rate Tuning (10 Hz or 50 Hz tuning steps).
This makes the PL-880 an outstanding receiver for its price, considering the 10 Hz fine steps, the choice of selectivity, the long life on its battery, etc…

Be sure to choose a distributor that sells PL-880 with the tuning bug corrected.

Click here to purchase a PL-880 via Anon-Co.

Many thanks, Georges, for the follow-up. I’m very happy to hear that PL-880 retailers like Anon-Co are assisting in such a helpful and effective way.

No doubt, other PL-880 retailers will also begin to offer a firmware upgrade to fix the fine tuning bug. As Georges notes, please check before purchasing!

Reders/Retailers: Please comment if you can confirm that others are now shipping PL-880s with the fine tuning control fix.

Many thanks to SWLing Post reader, Gary (WN9U) who writes:

Just an FYI comment about the narrow filters NOT staying on while tuning. I read about the similar problem that you encountered during the initial testing of the PL-880.

While tuning CW stations with the 500 Hz filter turned on (fast or fine tuning), the filter would always revert back to the 3.0 wider setting. It had never done this before. I tried several resets with no cure.

After further testing I found the fix: I had turned on the Hidden Menu Noise Reduction (switch 6) and did not realize it was on.

After turning off the Noise Reduction, I was able to tune with the narrow filters set at any band width. Evidently, the filter opens up to 3.0 when tuning with the Noise Reduction turned on & reset does not turn off this function.

Thanks so much for the tip, Gary! I’ll add this to our (still) growing list of PL-880 hidden features and tips. Seems there’s always something to discover on the Tecsun PL-880.

Many thanks to SWLing Post contributor, Paul Walker, who shares the image above and the following:

How about a video [from Galena, AK]? Here’s one I shot on the evening of April 15th while DXin’g and apparently logging Radio Bandeirantes 9645 kHz in Brazil:

Looks like a beautiful DX location you’ve got there, Paul. You’ve obviously found ways to mitigate receiver overload from the broadcast station with the number of loggings you’ve been posting as of late.

Indeed, Paul recently forwarded the following sample of logs from this very DXing spot. Paul writes:

Unless otherwise noted, all loggings were from a Tecsun PL-880 with an 80 foot long wire 5 feet up in a tree. My location is Galena, Alaska which is a village of 500 people about 300 miles east of Nome, Alaska and 300 miles west of Fairbanks, Alaska.

Comments questions or thoughts always welcome!

I was able to log Channel Africa broadcasting in French on 15235 kHz, two mornings last week.

This recording was made on Friday April 8, 2015 at 8:45 AM Alaska Daylight Time/1645UTC. I would rate the signal about 6 1/2 out of 10 with good audio, some light fading and no interference.

Audio here:

This recording was made on Wednesday April 6, 2015 at 8:37 AM Alaska Daylight Time/1637UTC. The signal was about a 6 out of 10 with moderate fading, a little more then the recording made on April 8th.

Audio here:

Radio Thailand 9390 kHz

This recording was made on Saturday April 9, 2015 at 10:36 AM Alaska Daylight Time/1836UTC. I would rate the signal about 7 1/2 to 8 out of 10 with good audio, some light fading and no interference.

Audio here:

Voice of Indoneisa 9526 kHz

This recording was made on Saturday April 9, 2015 at 10:36 AM Alaska Daylight Time/1836UTC. I would rate the signal about 4 1/2 out of 10 with ok audio, some light to moderate fading and some interference.

Audio here:

Voice of Vietnam 9625 kHz

This recording was made on Saturday April 9, 2015 at 9:00AM Alaska Daylight Time/1700UTC. I would rate the signal about 4 out of 10 with fair audio, some light to moderate fading and little interference.

Audio here:

All India Radio 11620 kHz

This recording was made on Saturday April 10 , 2015 at 1:29PM Alaska Daylight Time/2129UTC. I would rate the signal about 6 out of 10 with GOOD audio, some light to moderate fading and no interference.

Audio here:

Note: This was by FAR the best reception I’ve ever had of AIR. Their audio is usually pretty piss poor with poor quality and low modulation. Plus, their signal just isn’t that good usually.

I have also logged Voice Of Korea on 2850, 3320, 6100, 6400, 12015, 7220, 11910, 11935, 11735, 15105, 15180, 13760, 13650, 7580, 9650, 9875, 9445, 9665, 9425, 6170 and 3250 kHz.

Radio Algerienne Holy Quran and Radio Saudi are fairly regular visitors here and at times, pretty strong.

6160 kHz via Vancouver is heard several times a week…sometimes just barely, and other times, like a few days ago, nearly like a local.

The upper bands, 15 and 17 MHz seem to do real well here, especially by day, even smack in the middle of the day. I’ve heard RFI and DW via Issoudun right around lunch time in the 15 MHz area of the band.

I get Zanzibar on 11735 kHz from time to time…usually at least at fair levels.

CFRX 6070 is heard just about nightly, sometimes poor and barely audible but many times at least poor to fair and listenable. Now and then it’s pretty strong and listenable.

That is an impressive number of stations you’ve logged. It appears one of your easiest catches is Voice of Korea–I’m not surprised since you’re certainly within their broadcast footprint.

New Music Show and Contest

Many of you know that Paul also hosts an occasional music show via shortwave. Paul recently set times and frequencies for the next show–he notes:

I will be on WRMI, 7570 kHz from 0400-0600UTC Saturday June 2nd, Which is 12 midnight to 2 AM Eastern/9 PM to 11pm Pacific on Friday June 1st.

More oldies and rock n roll music with some country thrown in. I’m working on a CONTEST with some cool radio prizes and even bigger…. I am ironing out the technical details and going to try and do the 2 hot show live from my studio in Galena, Alaska.

My target audience this time with be the West Coast of the US and Canada. I expected the Midwestern US to get a good signal from the 315 degree beam towards Vancouver, Canada as it has to pass over the Midwest to get to the West Coast.

Contest details and QSL information to be released before the show!

I’ll plan to re-post this announcement, with any updates, closer to the broadcast date of June 2, 2016.

Thanks again, Paul, for sharing some of your radio world!

Many thanks to SWLing Post reader, Bill, who writes:

Maybe you already know this, but I only recently discovered the Tecsun PL-880 rechargeable battery is available on Amazon for $9.99 and can qualify for Prime free shipping. I bought one and it seems to work great. There are other battery models on Amazon that may work, but many had comments about inconsistent quality, various countries of origin and even various sizes! I decided to go with this one branded as Tecsun to play it safe and am happy. Just an FYI to your readers.

Click here to view on Amazon.

Thanks, Bill! I have two PL-880 batteries and they continue to do a fine job running the PL-880. They are over two years old now (hard to believe–!), so I’ll keep Amazon in mind. Note that Universal Radio also has the replacement battery for $9.95 (though no free shipping).

Many thanks to SWLing Post contributor, Paul Walker, who writes:

My listening post as it stands now

Time: 1600-1700 UTC
Location: Galena, Alaska (Rural central interior, halfway between
Nome & Fairbanks)
Equipment:Tecsun PL880, 225 foot long wire oriented north south and 225 foot long wire oriented east west, EmTech ZM2 Antenna Tuner, Workman Antenna Switch and DXEngineering RPA-1PLUS HF PreAmp

Paul, I hope you’re enjoying the good weather while it’s still summer! I imagine the days and nights are getting cooler already and soon, that beautiful stretch of Yukon will be frozen.

I’m happy to see you’re employing the ZM-2 tuner; it’s an effective little antenna manual tuner and doesn’t need a power source.  Plus, if you ever get your ham radio license, you can use it in the field with QRP equipment. You’ve got a great setup there with quality components!

Many thanks to SWLing Post reader, Paul, who writes:

While putzing around with my new Tecsun PL-880 that I got while browsing at Universal Radio’s store in Columbus OH, I found what appears to be an adjustable noise reduction function.

Firmware level: 8820
Mfg date: probably August 2016 (201608 from the serial number inside the tilt stand)

Here are the steps to check it out;

When in a shortwave band, press “4” until either “ON” or “OFF” appears in the display.
If it displays “OFF”, press 4 briefly to clear, then long press again until “ON” appears.

Then, long press “9” until a two digit number appears.

Use either tuning knob to increase or decrease the number.

The number appears to correspond with the DbM threshold of the received signal.

Perhaps someone can play with the feature and elaborate on its function.

Hope this is useful, let me know.

Thank you for sharing, Paul!  I do wonder if this adjustment could affect the DNR setting (check out this previous post as well).

Post readers: Has anyone else been able to replicate and test this hidden feature? Please comment!

Many thanks to SWLing Post contributor, Richard Langley, who lives in New Brunswick, Canada, and sent the following update earlier this month:

I often go outdoors to escape the RFI generated in and around the house, which can be even worse during the holidays with all the LED Christmas displays.

Trouble is, the snow is getting a bit deep for the trek to the back of the cleared part of my yard.

The attached photos show my setup on New Year’s Day to record Stephen Cooper’s DigiDX program over WRMI.

One thing about DXing and SWLing outside in the winter is that the knobs on the Tecsun PL-880 can become stiff to turn if it’s too cold and the battery doesn’t last as long as when it’s warm outside. Best approach is to go out with a fully charged battery, tune to a particular frequency and record the audio for later playback.

[…]I’ve also noted on a couple of occasions that the Tecsun will shut itself off after a few hours in really cold weather (around -20°C). And it’s not that the battery power is exhausted. I can turn it back on manually and it shows plenty of battery capacity remaining.

Thanks for sharing your notes, Richard! It certainly looks like a winter wonderland at your home. I like how you’ve made such a lightweight, portable station that protects the PL-880 from moisture.

Paul Walker also uses the PL-880 extensively in Galena, Alaska–in some very cold temps as well. Perhaps we can compare notes.

Post readers: What radios do you use outdoors in winter conditions? Please feel free to share your experiences!

By the way: I should offer my sincere apologies for sharing beautiful winter wonderland scenes while many of our dear readers in Australia are coping with a sweltering heatwave!  Perhaps we should also be sharing notes about high temp outdoor DXing!?

Many thanks to SWLing Post contributor, Paul Walker, who notes that Universal Radio has a used Tecsun PL-880 with box, manual and accessories for $119.95 + shipping. This radio is listed as being in “good” condition.

Universal Radio backs their used equipment with a 60 day limited warranty, so you can buy with confidence.

You’ll need to call Universal Radio (800-431-3939) to purchase items from their used list.

Thanks for the tip, Paul!

Many thanks to SWLing Post contributor, Troy Riedel, who has recently added the hidden bandwidth adjustment feature to Cap Tux’s excellent PL-880 reference sheet.

Here are links to download the updated sheet:

• PDF
• MS Word

I will also add this to the Complete list of Tecsun PL-880 hidden features page: a place where you can comment if you note any previously unpublished PL-880 hidden features.

Thanks again, Troy!

Many thanks to SWLing Post contributor, Garcia (PU3HAG), who writes:

Not sure if you noticed this before, for me it was a glad surprise how well the sleep timer works on Tecsun PL-880.

To use the sleep timer, you press the power button for a about 2s-3s until you see the timer, using the tuning knob you can choose several options between 1 and 120 minutes.

Neat finding #1: the timer settings is kept between power cycles. So, you only have to set it once (in some radios, you need to set the timer for each use).

Neat finding #2: when using the timer, you would expect – as every other radio – the radio to shut off immediately along with ‘pop’ on the headphones. This is not the case with PL-880. When the timer kicks in, the radio gently fades out the audio for 20s-30s and then shuts off. No pops to hear. Amazing.

That is brilliant! I never use the sleep timer on the PL-880, but perhaps I will now. As you state, most sleep timers simply turn off the radio without warning and include an audio pop–not great if you’re wearing headphones and trying to sleep. Very happy to hear the PL-880 slowly fades. Happy dreams!

Many thanks to SWLing Post contributors, Troy, Ron and Steve, who note that Jay Allen has just posted a review of the Grundig Executive Satellit on his website.

The upshot? Jay found the performance identical to the previous (non-Executive) version of the Satellit which is to say that it has excellent AM performance and built-in audio.

In February, Clint Gouveia wrote up a review of the Satellit based on three weeks of DXing in the field. He found it to be an exceptional performer on the shortwave bands and stated:

“Ultimately, I have to strongly recommend this portable to anyone interested in DXing and in particular those that embark on DXpeditions.”

He embedded a number of videos from the field in his review (click here to view).

And, of course, our buddy Tom Stiles also reviewed the Executive Satellit on his YouTube Channel.

The original Eton Satellit

Like Clint, I own the original non-Executive version of the Satellit–since performance is identical, I’m not going to “upgrade” to the Executive version (though I do really like the executive case).

After Clint’s review in February, I stated taking the Satellit with me on travels more often and have been most pleased with its performance. While it took me a while to get used to its amber display at night, I must say it is a fantastic performer, has superb built-in audio and is overall a wonderful full-featured radio travel companion.

I often forget to mention the Satellit when readers ask for portable radio recommendations–perhaps this is because the Tecsun PL-880 simply overshadowed it in my mind.  Not anymore.

Executive on sale

As we mentioned yesterday, the Executive Satellit also happens to be on sale at Amazon right now for $156.92 shipped. Click here to view on Amazon.com.

Eton Satellit vs. Tecsun PL-880

Speaking of the Tecun PL-880, SWLing Post contributor Charles Rippel recently ordered the Executive Satellit–he plans to compare it with the Tecsun PL-880 and share his findings with us. Stay tuned!

Many thanks to SWLing Post contributor, Chuck Rippel (K8HU) for the following guest post:

A Tale of Two Radios: Tecsun PL-880 vs Eton/Grundig Executive Satellit

By Chuck Rippel, K8HU

This proved to be a difficult comparison strictly when writing from the perspective of “which one is better.”

In my view, the two models compliment each other and both are worthy additions for any DX’er or listener. Each has its own set of useable and unique features. That said, 1970 is when I got my start in SWBC DX, either of these radios would have been among “the gold standards” at a time when Realistic DX-150s were $119.95 new, Hammarlund HQ-180s could be purchased new and Collins was still putting “winged emblems” on their amateur equipment.

There were few consumer grade receivers which had frequency accuracy until the introduction of the Allied SX-190 at the princely sum of $249 but when tuning the 49MB in the evening, one heard the entire band on one frequency due to overloading. Oh well, I digress….

The Executive Satellit will be the 3rd from the Eton Satellit family I purchased. The first two were initial releases of the standard, black version; and both suffered from build quality issues and had to be returned. Some months down the road, I noticed that my friend, Clint Gouveia on his “Oxford Shortwave,” YouTube channel was demonstrating great success with his own Eton Satellit and with that in mind, I made what would become the 3rd plunge with Clint’s appreciated encouragement.

My first operational impression of the Executive Satellit was that the overall build quality had been improved by an order of magnitude. The radio looks and feels good, responding well to control inputs although their placement on the PL-880 is superior to my way of thinking. On the Executive, I quickly found a feature different from the original Eton Satellit, the adjustable display backlight can be set to stay on indefinitely, even with the radio turned off and when the clamshell style leather case held in place by a number of magnets is folded over the front of the radio, the display is out of view and if left backlit, will result in a set of dead batteries over time.

While on the subject of the Eton’s display, it is a major selling feature. The yellow-orange characters convey all the information a user might need with excellent resolution and the display is overall, pleasant to look at. A welcome change from LCD type displays more commonly found in portables today including the Tecsun PL-880.

The Satellit uses 4 AA batteries (I recommend rechargeable, 2000ma Panasonic Eneloop batteries) while the Tecsun uses an included, single 16550 2000ma lithium ion battery. Both radios share the capability of being able to charge their internal batteries when connected to an included DC wall-wort power sources and additionally, in the case of the Tecsun, from a USB source. The Satellit uniquely allows the user to enter a charging time in minutes via the front panel keypad and the owners manual suggests charging times for batteries of various capacities. A nice feature.

Each manufacturer stresses memory capacity as a selling point. Is a radio sporting 3,000+ memories better than a model with “only” 700? I suggest such a feature is a viable selling point only if the user can remember what is stored in each memory location. Both models help the user organize memory usage by organizing them in “pages” or banks.

As an aside, I organize memory pages using a couple for local MW stations, and one for local FM. Pages 1-24 contain SWBC stations organized by time. Bank or page 1 contains SWBC stations that can be heard at 0100Z, page 2 at 0200Z and so on. A plus for the Eton, the user has the option of assigning an 8 character label to each page of seven memory channels which are accessible via a row of “F” keys, located just under the display.

What about reception; what’s “under the hood?” Both have variable bandwidth, SSB, an external antenna input and fine tuning options. Using only the stock, attached whip antenna I was able to pick up Radio Havana, Cuba on 15370.0 although the PL880 suffered from picking up its own electronic spurs, seemingly a Tecsun characteristic noted across several of their models. Both radios received the station adequately but I’ll give a slight edge to the Satellit due to its slightly better audio recovery. Uniquely, the Satellit offers sideband selectable, synchronous detection but the resulting audio is on the muddy side and that feature is less than stellar. On FM, both were able to provide stereo reception of a 250 watt translator on 96.5 mHz located approximately 10 miles away with excellent, nearly identical audio quality. In as much as audio quality is judged differently by each of us, I will refrain from favoriting one radio over another.

The ability to receive, decode and display RDS data is a plus for the Satellit. An aside, there is a well known MW-DX’pert who also chases FM DX. What does he use for a radio and antenna? How about a Sony 2010 and Tecsun PL-310? He puts each radio on an open frequency and waits for E-skip. No special, hi tech FM tuner or multi-element FM antennas. Point being, either of these radios have high performance FM tuners and are capable of delivering FM DX when there is E-Skip or Tropo-Ducting which speaks highly for both.

As an Ultra-light DX’er since its inception, MW reception is important. Here again, performance between the two is was nearly identical although with their small ferrite internal MW antennas, don’t compete with say… a GE Super Radio II. Both the Eton and Tecsun benefit from an external, tuned, close- coupled MW antenna such as a Crate Loop. Unfortunately, the external antenna input on both is not operable on MW.

Video: Comparison of Satellit and PL-880

Click here to view on YouTube.

Clearly, there is no “best” here, either choice is a good one; having both is perhaps the best option. The performance of the Satellit and PL880 excel well beyond their price and make convenient traveling companions. A third of the size and half the price of what many consider “THE” benchmark portable multiband receiver, the Sony ICF-2010 or in Europe, the ICF-2001, both the Pl-880 and Satellit offer increased portability and compete closely with the Sony on performance and features.

Video: How to use Satellit synchronous detector

Click here to view on YouTube.

These attributes combine to deliver a sometimes rare commodity: VALUE ! I would challenge anyone to identify a current manufacturer, consumer grade receiver that offers the performance, features and audio quality of either these two receivers for under $250. All kudos aside, neither of these fine receivers will deliver the kind of gold plated performance delivered by a WinRadio, Drake R8B or Perseus, etc.

Many thanks, Charles, for sharing your thoughts on these fine portables! 

FYI: I just checked and the Eton Executive Satellit is still $156.92 shipped via Amazon.  

The Tecsun PL-880 is $159.95 (plus shipping) via Universal Radio, $159.99 via Anon-Co on eBay and $169.98 via Amazon, 

Many thanks to SWLing Post contributor, Larry Thompson, who writes:

There’s been some confusion on my part whether the Tecsun PL-880 is a dual conversion or triple conversion receiver. Amazon and eBay list the receiver as double conversion, whereas Universal Radio doesn’t mention either.

After scouring the Instruction Manual, I was pleased to learn that the PL-880 uses the Silicon Labs si4735 DSP microchip and has 4 Intermediate Frequencies.

1st IF: 55.845 MHz
2nd IF: 10.7 MHz
3rd IF: 45 kHz
4th IF: 128 kHz (exclusively for FM)

To me, that looks like a triple conversion architecture. The combination of the DSP microchip, and the triple conversion would explain why my Tecsun PL-880 is so much more sensitive and selective than my Sony ICF-SW8600GR.

My CountyCom GP-5/SSB emergency portable also has the same Silicon Labs DSP chip and it is almost as sensitive as the Tecsun PL-880, far more sensitive than the Sony. I’ve owned a Japan Radio JRC-525 and a Yaesu FT-900AT transceiver for many years, and the PL-880 digs out weak signals better than both those tabletop receivers, both dual conversion.

To quell the speculation, yesterday I contacted Anna at Anon-Co, the worldwide distributor for Tecsun radios. Her quick reply confirms my suspicions that the Tecsun PL-880 is indeed a triple conversion receiver. That would explain why it blows my Sony ICF-SW7600GR out of the water in senitivity and its ability to pull out weak stations.

Among all the other great attributes, this is an welcome discovery and one never mentioned in the specs by the various retailers of this receiver!

Thank you Larry, for shedding light on this–Anna would certainly know.

Your note makes me realize that I really should order a second, current production model PL-880. My PL-880 is from one of the first batches produced. I imagine I could benefit from some of the firmware tweaks that have been made to this receiver over time.  Perhaps it would even be a good time to compare the 1st generation with the current generation?

I just checked and Anon-Co is selling the PL-880 on eBay for $153.99 US shipped.

Have any SWing Post readers compared early and late model PL-880 units? Please comment.

Many thanks to SWLing Post reader, Bill, who writes:

Maybe you already know this, but I only recently discovered the Tecsun PL-880 rechargeable battery is available on Amazon for $9.99 and can qualify for Prime free shipping. I bought one and it seems to work great. There are other battery models on Amazon that may work, but many had comments about inconsistent quality, various countries of origin and even various sizes! I decided to go with this one branded as Tecsun to play it safe and am happy. Just an FYI to your readers.

Click here to view on Amazon.

Thanks, Bill! I have two PL-880 batteries and they continue to do a fine job running the PL-880. They are over two years old now (hard to believe–!), so I’ll keep Amazon in mind. Note that Universal Radio also has the replacement battery for $9.95 (though no free shipping).

Many thanks to SWLing Post contributor, Paul Walker, who writes:

My listening post as it stands now

Time: 1600-1700 UTC
Location: Galena, Alaska (Rural central interior, halfway between
Nome & Fairbanks)
Equipment:Tecsun PL880, 225 foot long wire oriented north south and 225 foot long wire oriented east west, EmTech ZM2 Antenna Tuner, Workman Antenna Switch and DXEngineering RPA-1PLUS HF PreAmp

Paul, I hope you’re enjoying the good weather while it’s still summer! I imagine the days and nights are getting cooler already and soon, that beautiful stretch of Yukon will be frozen.

I’m happy to see you’re employing the ZM-2 tuner; it’s an effective little antenna manual tuner and doesn’t need a power source.  Plus, if you ever get your ham radio license, you can use it in the field with QRP equipment. You’ve got a great setup there with quality components!

Many thanks to SWLing Post reader, Paul, who writes:

While putzing around with my new Tecsun PL-880 that I got while browsing at Universal Radio’s store in Columbus OH, I found what appears to be an adjustable noise reduction function.

Firmware level: 8820
Mfg date: probably August 2016 (201608 from the serial number inside the tilt stand)

Here are the steps to check it out;

When in a shortwave band, press “4” until either “ON” or “OFF” appears in the display.
If it displays “OFF”, press 4 briefly to clear, then long press again until “ON” appears.

Then, long press “9” until a two digit number appears.

Use either tuning knob to increase or decrease the number.

The number appears to correspond with the DbM threshold of the received signal.

Perhaps someone can play with the feature and elaborate on its function.

Hope this is useful, let me know.

Thank you for sharing, Paul!  I do wonder if this adjustment could affect the DNR setting (check out this previous post as well).

Post readers: Has anyone else been able to replicate and test this hidden feature? Please comment!

Many thanks to SWLing Post contributor, Richard Langley, who lives in New Brunswick, Canada, and sent the following update earlier this month:

I often go outdoors to escape the RFI generated in and around the house, which can be even worse during the holidays with all the LED Christmas displays.

Trouble is, the snow is getting a bit deep for the trek to the back of the cleared part of my yard.

The attached photos show my setup on New Year’s Day to record Stephen Cooper’s DigiDX program over WRMI.

One thing about DXing and SWLing outside in the winter is that the knobs on the Tecsun PL-880 can become stiff to turn if it’s too cold and the battery doesn’t last as long as when it’s warm outside. Best approach is to go out with a fully charged battery, tune to a particular frequency and record the audio for later playback.

[…]I’ve also noted on a couple of occasions that the Tecsun will shut itself off after a few hours in really cold weather (around -20°C). And it’s not that the battery power is exhausted. I can turn it back on manually and it shows plenty of battery capacity remaining.

Thanks for sharing your notes, Richard! It certainly looks like a winter wonderland at your home. I like how you’ve made such a lightweight, portable station that protects the PL-880 from moisture.

Paul Walker also uses the PL-880 extensively in Galena, Alaska–in some very cold temps as well. Perhaps we can compare notes.

Post readers: What radios do you use outdoors in winter conditions? Please feel free to share your experiences!

By the way: I should offer my sincere apologies for sharing beautiful winter wonderland scenes while many of our dear readers in Australia are coping with a sweltering heatwave!  Perhaps we should also be sharing notes about high temp outdoor DXing!?